On the design of secure primitives for real world applications

This editorial paper provides an overview of new advances on hardware security challenges and promising solutions for real world applications. It first presents the increasing hardware vulnerabilities with the emergence of diverse computing platforms. Then, it details the technical challenges, research opportunities, and potential solutions to cyber-attacks on -physical- devices.     

Impact of urban development on residents’ public transportation travel energy consumption in China: An analysis of hydrogen fuel cell vehicles alternatives

Urban development has an important influence on the energy consumption of transportation. To develop public transportation is one of the important ways to decrease the energy consumption of urban transportation. It is very urgent to upgrade technology to reduce the energy consumption and emissions of the vehicles constantly. The popularization of hydrogen fuel cell vehicles is the trend of the future automobile industry, which can effectively reduce traffic energy consumption and alleviate urban pollution. This article analyzes the impact of urban development on public transport and private transportation energy consumption from 2013 to 2015; and uses hydrogen fuel cell vehicles alternatives in urban public transport as a scenario. It shows that urban economic development can effectively reduce public transport. Population growth will increase greatly energy consumption of public transport, while larger cities with reasonable spatial density can reduce traffic energy consumption. Moreover, hydrogen fuel cell vehicles can effectively reduce the energy consumption and pollution emissions of urban transportation during operating. Based on the above conclusions, this article will eventually provide targeted recommendations for the development of Chinese cities, public transport, and hydrogen fuel cell vehicles.     

The relationship between centrality and land use patterns: Empirical evidence from five Chinese metropolises

The relationship between location and land use patterns is one of the classic theoretical issues in urban studies. Classic models based on the monocentricity hypothesis have limitations in the interpretation of modern urban structure. China has experienced institutional transformation in recent decades, and the interaction of national government policy, market forces and the natural environment has influenced urban planning in Chinese metropolises, resulting in urban structures with special characteristics. This paper examines the distribution of location and land use intensity, and tested the Alonso model by the relationship between them in five Chinese metropolises using Point of Interest data, space syntax methodology, the grid weighted statistical method and the Geographically Weighted Regression (GWR) model. Universal patterns about the scaling relation between intensity of land use types and the centrality of location are revealed. The elasticity of land use types to location, from high to low sensitivity, is commercial, residential then industrial land in most of the five metropolises studied. The sensitivity sequence of land use studied suggests that the hypothetical model based on the classical Alonso model can explain the spatial structure of modern metropolises in China to some extent, especially for the commercial land. But the order of sensitivity of residential land and industrial land to location does not conform to the model. The spatial heterogeneity in land use intensity and centrality were explored and the factors embedded were discussed. It can be found that the relation between centrality and land use intensity conforms to power law. In most of the metropolises studied, when the scaling relation between land use intensity and centrality is super linear, the sequence of the frequency value from high to low are commercial, residential and industrial land; when the scaling relation is sublinear, the sequence of the frequency value is industrial, residential and commercial land.     

优化冬瓜山铜矿磨矿产品粒度组成提高浮选指标研究

针对冬瓜山入浮颗粒粒度较粗且粒度组成分布不合理问题，基于磨矿产品的粒度分布及矿石力学性质对磨矿介质配比进行调整以优化入浮颗粒的粒度组成，结果表明:冬瓜山一段磨矿介质尺寸方案为m（φ60）:m（φ40）:m（φ30）:m（φ25）=40:10:30:20，采用推荐方案可提高磨矿产品中-0.1+0.01 mm颗粒产率2.28%。推荐方案与现场方案磨矿产品经一粗两精两扫的浮选闭路对比试验，推荐方案铜精矿回收率90.11%，较现场方案提高1.34%，精矿品位提高了0.94%。对浮选尾矿筛分并检测分析可知推荐方案磨矿产品在-0.1+0.01 mm颗粒中铜的回收效果优于现场方案，利用推荐的介质配比方案优化磨矿产品粒度组成，有效提高了冬瓜山选铜浮选指标。      

新型纳米平板陶瓷膜在纸箱生产废水回用中的工程应用

采用混凝沉淀+水解酸化+MBR+活性炭吸附组合工艺来回用纸箱厂废水。MBR膜采用的是新型纳米平板陶瓷膜。介绍了各处理段的工艺特点、构筑物的设计尺寸、设备选型等,并对新型纳米平板陶瓷膜的清洗进行了介绍。系统运行一年,出水水质稳定,优于≤城市污水再生利用城市杂用水水质≥GB/T 18920-2002表1中的城市绿化排放标准,即BOD5≤20 g/L,浊度≤10 NTU,色度≤30,并分析了本工程的处理成本及所产生的经济效益。     

深埋矿体移动带三维圈定方法及应用

针对深埋矿山开采移动带二维圈定方法工作量大、精度低且难以满足日益增长的经济效益需求的问题，提出了一种深埋复杂矿体移动范围三维确定方法。结合沙岭金矿千米深井工程实例，在移动范围确定过程中，借助先进的3D建模技术获得三维矿山模型。该模型可以实现各类地质体的可视化，直观地展示其形态与产状，清晰地反映各构成因素间的相互关系。在3D模型中截取的特征剖面与经典移动带圈定岩移参数获取方法相结合，能轻松获得各特征剖面上的岩移参数值。通过给定的岩移参数值进而确定各特征剖面上的地表移动边界点，将各移动边界点连接即可实现矿山移动范围的圈定。研究结果表明，基于三维地质建模技术的移动带圈定方法合理可行，确定的纱岭金矿地表移动带能够兼顾安全生产与经济效益，为矿山生产开发奠定了有益基础，为类似矿山提供了有益借鉴。     

基于哈希链的软件定义网络路径安全

针对软件定义网络中，控制器无法保证下发的网络策略能够在转发设备上得到正确执行的安全问题，提出一种新的转发路径监控安全方案。首先以控制器的全局视图能力为基础，设计了基于OpenFlow协议的路径凭据交互处理机制；然后采用哈希链和消息验证码作为生成和处理转发路径凭据信息的关键技术；最后在此基础上，对Ryu控制器和Open vSwitch开源交换机进行深度优化，添加相应处理流程，建立轻量级的路径安全机制。测试结果表明，该机制能够有效保证数据转发路径安全，吞吐量消耗比SDN数据层可信转发方案（SDNsec）降低20%以上，更适用于路径复杂的网络环境，但时延和CPU使用率的浮动超过15%，有待进一步优化。     

Microstructure and mechanical properties of squeeze-cast Al−5.0Mg−3.0Zn−1.0Cu alloys in solution-treated and aged conditions

The microstructure and mechanical properties at different depths of squeeze-cast, solution-treated and aged Al−5.0Mg−3.0Zn−1.0Cu alloy were investigated. For squeeze-cast alloy, from casting surface to interior, the grain size of α(Al) matrix and width of T-Mg₃₂(AlZnCu)₄₉ phase increase significantly, while the volume fraction of T phase decreases. The related mechanical properties including ultimate tensile strength (UTS) and elongation decrease from 243.7 MPa and 2.3% to 217.9 MPa and 1.4%, respectively. After solution treatment at 470 °C for 36 h, T phase is dissolved into matrix, and the grain size increases so that the UTS and elongation from surface to interior are respectively reduced from 387.8 MPa and 18.6% to 348.9 MPa and 13.9%. After further peak-aging at 120 °C for 24 h, numerous G.P. II zone and η′ phase precipitate in matrix. Consequently, UTS values of the surface and interior increase to 449.5 and 421.4 MPa, while elongation values decrease to 12.5% and 8.1%, respectively.     

高碾压混凝土重力坝分区材料-结构界面特性与变形协调仿真分析

高碾压混凝土重力坝不同功能部位"结构特性"与"材料性能"的差异产生的变形协调问题直接关系到工程结构的安全运行,现阶段变形协调分析多是对结构变形和受力进行分析,对异种材料变形协调机理认识不足,缺乏理论基础研究。本文基于界面力学理论,考虑混凝土坝分区中常见的两种双材料界面形式与理想界面的连续边界条件,基于奇异性特征值的特征方程,提出了以应力奇异性特征值作为异种材料变形协调的评价指标,并通过有限元分析验证了理论计算的正确性与有效性;进而分析了界面结合角度和异种材料组合对单侧自由界面端与埋入界面折点处应力奇异性的影响,通过非均质有限元数值仿真分析了复合试件破坏模式,研究了抗压强度与应力奇异性特征值的关系;最后通过统计实际混凝土坝工程中不同坝段内的双材料界面的材料参数(弹性模量)与结构参数(界面形式与结合角度),计算奇异性特征值,评价了该工程中界面的变形协调特性,为高混凝土坝分区材料-结构设计与材料选取提供新的思路。